VOLVO
ECM-P211292 - Throttle Actuator Control System - Stuck Closed. Component Failures. Performance or incorrect operation
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
During an attempt to adapt the throttle unit, the engine control module has found that the throttle is held back, or that its opening spring is not functioning correctly. The fault is a component fault with incorrect operation, and it may lie in the throttle, the wiring or the control module.
Mögliche Ursachen
- The throttle sticks or is blocked, for example by oil film or dust
- Contact resistance or oxidation between the control module and the throttle unit
- An open circuit, or a short to ground or supply voltage, in the wiring to the throttle motor
- The wires to the throttle motor have shorted to each other
- Damaged throttle unit
Was Sie tun können
- 1Read the codes in the control module and fix any stored codes for the throttle unit, the position sensor or the control module first
- 2Check that the fuses are intact
- 3With the ignition off, gently press the throttle plate and check whether it sticks or is blocked
- 4Check the connectors at the throttle unit and the engine control module for contact resistance and oxidation
- 5Look for breaks and shorts in the wiring to the throttle motor, and use a multimeter to confirm it is not shorted to ground, supply voltage or other wires
- 6If the fault remains, have a workshop with diagnostic equipment decide whether the throttle unit needs replacing
Symptome, die Sie bemerken können2
- The malfunction indicator lamp lights up
- Poor performance
Was der Fehler beeinflussen kann1
- Depending on the fault, the control module may cut the supply to the throttle motor, and the throttle then aims to return to its spring-loaded position
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.