ECM-P211975
VOLVO
ECM-P211975 - Throttle Actuator Control Throttle Body Range/Performance. Mechanical Failures. Emergency position not reachable
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (27)
- Volvo S60 (2011–)2011Alle Motoren außer: B6304T4, D4162T, D5204T2, D5244T10
- Volvo S60 (2011–)2012Nur Motor: B4164T, B4164T2, B4164T3, B4204T7, B5254T5
- Volvo S60 (2011–)2013–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010Nur Motor: B4204T6, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2011Nur Motor: B4164T, B4204T6, B4204T7, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B4164T, B4164T2, B4204T6, B4204T7, B5254T10
- Volvo S80 (2007–)2013–2014Nur Motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Nur Motor: B4164T
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010Nur Motor: B4204T6, B5254T10, B5254T11
- Volvo V70 (2008–)2011Nur Motor: B4164T, B4204T6, B4204T7, B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B4164T, B4164T2, B4204T7, B5254T10
- Volvo V70 (2008–)2013–2014Nur Motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Nur Motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
During an adaptation attempt, the engine control module has found that the throttle angle in its return end position lies outside the programmed limit. The fault is mechanical, so the throttle cannot reach its emergency position.
Mögliche Ursachen
- The throttle sticks or is blocked, for example by oil film or dust
- Poor contact or oxidation between the control module and the throttle unit
- Damaged throttle unit
Was Sie tun können
- 1Check that the throttle is not sticking or blocked by dirt or an object, and clean the throttle unit if needed
- 2With the ignition off, check the connectors at the throttle unit and the engine control module for contact resistance and oxidation
- 3With the ignition off, turn the throttle gently by hand and let it go. If the return spring does not bring it back, the throttle unit is damaged
- 4Have a workshop carry out the throttle adaptation, since this fault can affect the adaptation values
- 5If the fault remains, have a workshop decide whether the throttle unit needs replacing
Symptome, die Sie bemerken können3
- The engine lacks power and performs poorly
- Uneven idle
- The Check engine light comes on or behaves abnormally
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.