VOLVO
ECM-P212038 - Throttle/Pedal Position Sensor/Switch D Circuit. FM (Frequency Modulated) / PWM (Pulse Width Modulated) Failures. Signal frequency incorrect
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
10 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (31)
- Volvo S60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo S60 (2011–)2013Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2010Nur Motor: B6304T2, B6324S, B6324S2
- Volvo S80 (2007–)2011–2012Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013Nur Motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2015Alle Motoren außer: B4164T, D4162T, D4204T5, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Nur Motor: B4204T11, B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo V60 (2011–)2013Nur Motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Nur Motor: B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011–2012Nur Motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013Nur Motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Nur Motor: B4204T11, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Nur Motor: B4204T11, B5204T9, B6304T4
- Volvo XC60 (2009–)2010Nur Motor: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2013Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Alle Motoren außer: B4204T7, D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Nur Motor: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2013Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11, B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
Although the code is named throttle and pedal position sensor, it concerns the accelerator pedal sensor. The engine control module has registered an incorrect frequency on the PWM signal from the sensor, and it compares that PWM signal with the analogue signal that arrives over CAN.
Mögliche Ursachen
- Loose connections or contact resistance in the connections on the PWM signal wire
- Interference on the PWM signal wire
- Damaged accelerator pedal position sensor
Was Sie tun können
- 1Check that the fuses are intact
- 2With the ignition off, go through the connectors at the pedal sensor and the engine control module, and look for loose connections and oxidation
- 3Check that the ground wire to the pedal sensor has no break
- 4With the ignition on, use a multimeter to check that the supply voltage to the sensor is normal battery voltage
- 5If you have a diagnostic tool, read the pedal position in live data while pressing and releasing the pedal slowly, and check that the values follow the pedal
- 6If the fault remains, have a workshop with diagnostic equipment check the pedal sensor and its wiring
Symptome, die Sie bemerken können3
- A text message and a warning symbol appear in the display
- A message appears in the information display
- The accelerator pedal is ignored during braking
Was der Fehler beeinflussen kann3
- The control module uses the analogue signal sent over CAN
- The pedal position that corresponds to the released pedal is used when the brake pedal is pressed at the same time
- Driveability suffers when the fault remains for an extended time
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.