VOLVO
ECM-P212236 - Throttle/Pedal Position Sensor/Switch D Circuit Low. FM (Frequency Modulated) / PWM (Pulse Width Modulated) Failures. Signal frequency too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (11)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011–2015Nur Motor: D4162T
- Volvo S80 (2007–)2008–2010Nur Motor: D4204T
- Volvo S80 (2007–)2012–2015Nur Motor: D4162T
- Volvo V40 (2013–)2013–2015Nur Motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011–2015Nur Motor: D4162T
- Volvo V70 (2008–)2008–2010Nur Motor: D4204T
- Volvo V70 (2008–)2012–2015Nur Motor: D4162T
Was bedeutet der Fehlercode?
The engine control module monitors the PWM signal from the accelerator pedal sensor and has registered that it has too low a frequency. The fault may come from connectors, a break in the signal ground wire, a signal wire shorted to ground or supply voltage, or a damaged accelerator pedal position sensor.
Mögliche Ursachen
- Poor contact or oxidation, or a loose connector
- An open circuit in the signal ground wire
- The signal wire is short-circuited to ground or supply voltage
- Damaged accelerator pedal position sensor
Was Sie tun können
- 1Check that the fuses are intact
- 2Look at the connector at the pedal sensor and the engine control module, and check for looseness and oxidation
- 3Use a multimeter to check that the signal ground wire has no break
- 4Look for chafing on the signal wire, and use a multimeter to check that it is not shorted to ground or supply voltage
- 5If you have a diagnostic tool, read the pedal position in live data and check that it follows the pedal
- 6If the fault remains, have a workshop decide whether the pedal sensor needs replacing
Symptome, die Sie bemerken können2
- A text message and a warning symbol appear in the display
- The engine lacks power and performs poorly
Was der Fehler beeinflussen kann1
- Engine torque may be limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.