VOLVO
ECM-P21242F - Throttle/Pedal Position Sensor/Switch D Circuit Intermittent. General Signal Failures. Signal erratic
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (20)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Nur Motor: B4164T
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Nur Motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Nur Motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
The fault is intermittent, meaning it comes and goes, so it may not show up right now. The engine control module has registered that the analogue signal from the accelerator pedal sensor is incorrect, and compares it with the PWM signal. The code is only set if one of the codes ECM-P012000, ECM-P012200 or ECM-P012300 has been detected, and here the fault has not lasted long enough for that.
Mögliche Ursachen
- Contact resistance or oxidation in the connectors
- Damaged accelerator pedal position sensor
Was Sie tun können
- 1Check that the fuses are intact
- 2Start the engine and read the accelerator pedal position in live data while slowly pressing and releasing the pedal. Check that the values follow the pedal and each other
- 3Check the connectors at the pedal sensor and the engine control module for contact resistance and oxidation. Loose connections are a common cause of intermittent faults
- 4If the fault is intermittent and does not show during these checks, test drive the car and read the code again afterwards
- 5If the fault remains, have a workshop decide whether the pedal sensor needs replacing
Symptome, die Sie bemerken können2
- A text message and a warning symbol appear in the display
- The engine lacks power and performs poorly
Was der Fehler beeinflussen kann1
- Engine torque may be limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.