VOLVO
ECM-P212526 - Throttle/Pedal Position Sensor/Switch E Circuit. General Signal Failures. Signal rate of change below threshold
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
This is a consequential fault. Via CAN, the engine control module gets a fault message from the CEM. The message points to a fault in the analogue pedal signal or in the CAN communication. The underlying fault lies in the CEM and should be fixed first, after which this code can be cleared.
Mögliche Ursachen
- A fault in the central electronic module (CEM)
Was Sie tun können
- 1First read the fault codes in the central electronic module (CEM), and fix them
- 2Clear this code only after the fault in the CEM has been fixed and cleared, then check whether it comes back
- 3If you have a diagnostic tool, read the pedal position in live data with the engine running and check that the value follows the pedal
- 4If the code returns after the CEM has been fixed, have a workshop with diagnostic equipment trace the CAN communication and the pedal sensor
Symptome, die Sie bemerken können2
- Poor response from the accelerator pedal
- The cruise control does not work at all
Was der Fehler beeinflussen kann1
- The accelerator pedal stops working completely when the brake pedal is pressed
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.