VOLVO
ECM-P212568 - Throttle/Pedal Position Sensor/Switch E Circuit. Algorithm Based Failures. Event information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
This is an event-controlled information code. It does not mean that the control module where it is active has a fault; it is there for information. The code shows that a message from the central electronic module (CEM) about the accelerator pedal signal or the CAN communication has reached the engine control module. If the code is on its own, there is no fault that needs fixing.
Mögliche Ursachen
- This code does not stem from a fault needing action, unless another fault code is set alongside it
- The fault the message refers to is in the central electronic module (CEM)
Was Sie tun können
- 1Read the fault codes in both the engine control module and the central electronic module (CEM) and see whether this code is on its own
- 2If it is on its own there is no fault to fix, because there is no fault-tracing for this code itself
- 3If another fault code is stored with it, fix that one first, starting with the faults in CEM
- 4If you have a diagnostic tool and other codes are present, read the accelerator pedal value in live data and check that it follows the pedal movement
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.