VOLVO
ECM-P212700 - Throttle/Pedal Position Sensor/Switch E Circuit Low. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
14 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (42)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011Nur Motor: B6304T4, D4162T, D5204T2, D5244T10
- Volvo S60 (2011–)2012Nur Motor: B6304T4, D4162T, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2014Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4204T5
- Volvo S60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, D4204T5
- Volvo S80 (2007–)2008Nur Motor: D4204T
- Volvo S80 (2007–)2009Nur Motor: D4204T, D5244T10
- Volvo S80 (2007–)2010Alle Motoren außer: B4204S3, B4204S4, B4204T6, B5254T10, B5254T11, B5254T8, D4164T
- Volvo S80 (2007–)2011Nur Motor: B6304T4, B6324S4, B6324S5, B8444S, D5204T2, D5244T10
- Volvo S80 (2007–)2012Alle Motoren außer: B4164T, B4164T2, B4204T6, B4204T7, B5254T10
- Volvo S80 (2007–)2013Alle Motoren außer: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2014Alle Motoren außer: B4164T, B4164T2, B4204T6, B4204T7, D4204T5
- Volvo S80 (2007–)2015Alle Motoren außer: B4164T, D4204T5
- Volvo V40 (2013–)2013–2014Nur Motor: D4162T, D5204T4, D5204T6
- Volvo V40 (2013–)2015Nur Motor: B4204T11, D4162T, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4204T11, D4162T, D5204T6
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011Nur Motor: B6304T4, D4162T, D5204T2, D5244T10
- Volvo V60 (2011–)2012–2013Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2014Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4204T5
- Volvo V60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008Nur Motor: D4204T
- Volvo V70 (2008–)2009Nur Motor: D4204T, D5244T10
- Volvo V70 (2008–)2010Alle Motoren außer: B4204S3, B4204S4, B4204T6, B5254T10, B5254T11, D4164T
- Volvo V70 (2008–)2011Nur Motor: B6304T4, B6324S5, D5204T2, D5244T10
- Volvo V70 (2008–)2012Alle Motoren außer: B4164T, B4164T2, B4204T7, B5254T10
- Volvo V70 (2008–)2013Alle Motoren außer: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2014Alle Motoren außer: B4164T, B4164T2, B4204T7, D4204T5
- Volvo V70 (2008–)2015Alle Motoren außer: B4164T, B4164T2, D4204T5
- Volvo XC60 (2009–)2010Alle Motoren außer: B4204T6
- Volvo XC60 (2009–)2011–2012Alle Motoren außer: B4204T6, B4204T7
- Volvo XC60 (2009–)2013Alle Motoren außer: B4204T7
- Volvo XC60 (2009–)2014–2015Alle Motoren außer: B4204T7, D4204T5
- Volvo XC70 (2008–)2010–2013
- Volvo XC70 (2008–)2014–2015Alle Motoren außer: D4204T5
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The engine control module (ECM) receives the analogue accelerator pedal signal via the central electronic module (CEM) on the CAN network, and compares it with the PWM signal that runs directly to the ECM. The code is set when the analogue signal is too low. Because the signal passes through CEM, that module should be checked first.
Mögliche Ursachen
- Fault in the central electronic module (CEM)
- Fault on the CAN link between ECM and CEM
- The analogue signal is missing or incorrect
- Terminals with high resistance, oxidation or a loose fit
- Open circuit or short to ground in the signal cable
- Damaged accelerator pedal position sensor
Was Sie tun können
- 1Read the fault codes in the central electronic module (CEM) first, since CEM registers the pedal signal and passes it on
- 2Fix any fault codes for the pedal sensor in CEM first, then erase the code in the engine control module
- 3Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 4Check the connectors at the pedal sensor and CEM for loose contacts, contact resistance and oxidation, and see that the wires have no open circuit
- 5Use a multimeter to check that the signal wire and the ground wire to the pedal sensor have no open circuit
- 6With a diagnostic tool, read the pedal value in live data while the pedal is pressed and released; the value should follow the pedal movement
Symptome, die Sie bemerken können4
- Yellow warning symbol and a message in the display
- The car has poor performance and lacks power
- Poor performance and lack of power especially when pulling away from rest
- The accelerator pedal is ignored when braking
Was der Fehler beeinflussen kann3
- Engine torque may be limited
- The control module treats the pedal as released when the brake pedal is pressed at the same time
- Vehicle performance is limited if the fault persists for a long period
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.