ECM-P213800 - Throttle/Pedal Position Sensor/Switch D / E Voltage Correlation. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
14 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (30)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2013
- Volvo S60 (2011–)2014–2015Alle Motoren außer: D4204T5
- Volvo S80 (2007–)2007Nur Motor: B5254T6
- Volvo S80 (2007–)2008Nur Motor: B4204S3, B4204S4, B5254T6, D4204T
- Volvo S80 (2007–)2009Alle Motoren außer: B6304T2, B6324S, B8444S, D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Alle Motoren außer: D4164T
- Volvo S80 (2007–)2012–2013
- Volvo S80 (2007–)2014–2015Alle Motoren außer: D4204T5
- Volvo V40 (2013–)2013–2014
- Volvo V40 (2013–)2015Alle Motoren außer: D4204T14
- Volvo V40 Cross Country (2013–)2013–2014
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: D4204T14
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2013
- Volvo V60 (2011–)2014–2015Alle Motoren außer: D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008Nur Motor: B4204S3, B4204S4, B5254T6, D4204T
- Volvo V70 (2008–)2009Alle Motoren außer: B6304T2, B6324S, D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Alle Motoren außer: D4164T
- Volvo V70 (2008–)2012–2013
- Volvo V70 (2008–)2014–2015Alle Motoren außer: D4204T5
- Volvo XC60 (2009–)2010–2013
- Volvo XC60 (2009–)2014–2015Alle Motoren außer: D4204T5
- Volvo XC70 (2008–)2010–2013
- Volvo XC70 (2008–)2014–2015Alle Motoren außer: D4204T5
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors two pedal signals, PWM and analogue. The code is set when the PWM signal is faulty or the difference between the two signals is too great. The fault may lie in the pedal sensor, its connectors, the ground wire or the CAN network. The code can also follow from another fault code stored in the control module.
Mögliche Ursachen
- Contact resistance or oxidation in the connections between the pedal sensor and the engine control module
- Damaged accelerator pedal sensor
- Fault in the CAN communication between the engine control module and CEM
- Fault in the pedal sensor PWM signal
- Open circuit in the ground lead
- The fault may be caused by another fault code stored in the control module
Was Sie tun können
- 1With a diagnostic tool, read the pedal value in live data while the pedal is pressed and released; the value should follow the movement
- 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 3Check the connectors at the pedal sensor and the engine control module for contact resistance and oxidation
- 4Use a multimeter to check that the ground lead to the pedal sensor has no open circuit
- 5Have a workshop with diagnostic equipment check the CAN wires for open circuit and short circuit
- 6If these checks show no other fault and the fault remains, the pedal sensor may need replacing
Symptome, die Sie bemerken können4
- Poor response from the accelerator pedal
- Cruise control does not work at all
- Yellow warning symbol and a message in the display
- Accelerator pedal ignored when braking
Was der Fehler beeinflussen kann3
- The accelerator pedal stops working while the brake pedal is pressed
- Engine torque and output may be limited
- The speed limiter is not available
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.