VOLVO
ECM-P213886 - Throttle/Pedal Position Sensor/Switch D / E Voltage Correlation. Bus Signal / Message Failures. Signal invalid
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
12 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (40)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo S60 (2011–)2011Nur Motor: D5204T2, D5244T10
- Volvo S60 (2011–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2009Nur Motor: D5244T10
- Volvo S80 (2007–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Nur Motor: D5204T2, D5244T10
- Volvo S80 (2007–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Nur Motor: D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Nur Motor: D5204T4, D5204T6
- Volvo V40 (2013–)2015Nur Motor: D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Nur Motor: D5204T6
- Volvo V50 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo V60 (2011–)2011Nur Motor: D5204T2, D5244T10
- Volvo V60 (2011–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
- Volvo V70 (2008–)2009Nur Motor: D5244T10
- Volvo V70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Nur Motor: D5204T2, D5244T10
- Volvo V70 (2008–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014–2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Nur Motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle Motoren außer: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Alle Motoren außer: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Nur Motor: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
Was bedeutet der Fehlercode?
The engine control module (ECM) compares the PWM signal with the analogue signal from the pedal sensor, and the code is set when the difference between them becomes too great. The fault may lie in the pedal sensor, its connectors, the ground wire or the wires of the CAN network.
Mögliche Ursachen
- Poor contact or oxidation in the pedal sensor connections
- Open circuit in the ground wire or the signal ground wire
- Fault in the pedal sensor PWM signal
- Fault in the pedal sensor analogue signal
- Damaged accelerator pedal sensor
- Open or short circuit between the CAN network wires
Was Sie tun können
- 1Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 2Check the connectors at the pedal sensor and the engine control module for contact resistance and oxidation, and make sure none is loose
- 3Use a multimeter to check that the ground lead to the pedal sensor has no open circuit
- 4With a diagnostic tool, read the pedal value in live data while the pedal is pressed and released, and check that it follows the movement
- 5Have a workshop with diagnostic equipment check the CAN network wires for open circuit and short circuit
- 6Replace the pedal sensor first only if the other checks show no other fault
Symptome, die Sie bemerken können3
- Yellow warning symbol and a message in the display
- The car lacks power
- The engine hesitates, surges or runs jerkily during acceleration or deceleration
Was der Fehler beeinflussen kann1
- Engine output may be limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.