VOLVO
ECM-P214100 - Intercooler Bypass Valve, Circuit Low. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors the intercooler bypass valve, meaning the control valve at the inlet, and how it works. The code is set when the valve binds or sticks while it is being driven to open or close. The fault may lie in the signal wire or in the valve itself.
Mögliche Ursachen
- Signal wire short-circuited to ground
- The control valve at the inlet has jammed
- Damaged control valve at the inlet
Was Sie tun können
- 1Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 2Road test the car and see whether the fault appears when the throttle input changes
- 3With a diagnostic tool, activate the control valve at the inlet and listen and look for free movement without sticking
- 4Use a multimeter to check that the signal wire to the valve is not short-circuited to ground
- 5If the valve binds or sticks, have a workshop replace it
Symptome, die Sie bemerken können1
- The malfunction indicator lamp lights up or behaves abnormally
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.