VOLVO
ECM-P215B64 - Vehicle Speed / Output Shaft Speed Correlation. Algorithm Based Failures. Signal plausibility failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (20)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Nur Motor: B4164T
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Nur Motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Nur Motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
The engine control module (ECM) sets this code when the main speed signal deviates too much from the reference, which makes one of the two speed readings implausible. The fault may lie in either the transmission or the brake control module. The code cannot be erased until the codes in both modules have been fixed.
Mögliche Ursachen
- Faulty speed signal from transmission control (TCM)
- Faulty speed signal from brake control (BCM)
Was Sie tun können
- 1Read the fault codes in both the brake control module (BCM) and the transmission control module (TCM) first, since the fault may lie in either
- 2Fix the faults in BCM and TCM, then erase the code in the engine control module
- 3Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 4With a diagnostic tool, compare the BCM and TCM speed values in live data while the car is rolling
- 5Do not work on the braking system yourself; have a workshop check the BCM if its codes do not explain the fault
- 6Road test the car after the repair and check that the idle is smooth and that the code does not return
Symptome, die Sie bemerken können1
- The idle is uneven
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.