Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P217600
    VOLVO

    ECM-P217600 - Throttle Actuator Control System - Stuck Closed. General Failure Information. No sub type information

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    5 Modelle

    S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)

    Modelle nach Baujahr und Motor anzeigen (12)
    • Volvo S60 (2011–)2011Nur Motor: B4204T6, B4204T7
    • Volvo S60 (2011–)2012–2014Nur Motor: B4204T7
    • Volvo S80 (2007–)2010Nur Motor: B4204T6
    • Volvo S80 (2007–)2011–2014Nur Motor: B4204T6, B4204T7
    • Volvo V60 (2011–)2011Nur Motor: B4204T6, B4204T7
    • Volvo V60 (2011–)2012–2014Nur Motor: B4204T7
    • Volvo V70 (2008–)2010Nur Motor: B4204T6
    • Volvo V70 (2008–)2011Nur Motor: B4204T6, B4204T7
    • Volvo V70 (2008–)2012–2014Nur Motor: B4204T7
    • Volvo XC60 (2009–)2010Nur Motor: B4204T6
    • Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
    • Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7

    Was bedeutet der Fehlercode?

    The ECM supervises the throttle and how it works. The code is set when adaptation of the throttle has not been completed because certain external conditions were not met. The fault may lie in a sticking throttle, the connectors, the wiring to the throttle motor or the throttle unit itself.

    Mögliche Ursachen

    • The throttle is sticking or blocked by an oil film or dust
    • The connections between the ECM and the throttle unit show contact resistance or oxidation
    • Open circuit, or short circuit to ground or supply voltage, in the wiring to the throttle unit's motor
    • Wiring to the throttle motor is short-circuited to itself
    • Damaged throttle unit

    Was Sie tun können

    1. 1Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
    2. 2With the ignition on, check that the throttle is not sticking or blocked by dirt or oil film
    3. 3Check the connectors between the engine control module and the throttle unit for contact resistance and oxidation
    4. 4Use a multimeter to check that the wires to the throttle motor have no open circuit and are not shorted to ground, supply voltage or each other
    5. 5With a diagnostic tool, read the throttle position in live data while the pedal is pressed and released
    6. 6Have a workshop with diagnostic equipment carry out the throttle adaptation once the other checks are done

    Symptome, die Sie bemerken können2

    • The car has poor performance and lacks power
    • The malfunction indicator lamp lights up or behaves abnormally

    Was der Fehler beeinflussen kann2

    • Based on the fault type, the ECM may cut power to the throttle motor
    • The throttle then tries to set itself to the spring-loaded return position

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.