Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P217821
    VOLVO

    ECM-P217821 - System Too Rich Off Idle - Bank 1. General Signal Failures. Signal too low

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    3 Modelle

    S60 (2011–), S80 (2007–), V70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
    • Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
    • Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
    • Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
    • Volvo S80 (2007–)2012Nur Motor: B5254T10
    • Volvo V70 (2008–)2008Nur Motor: B5254T6
    • Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
    • Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
    • Volvo V70 (2008–)2012Nur Motor: B5254T10

    Was bedeutet der Fehlercode?

    The engine control module (ECM) adjusts injection from the lambda sensor reading. The code is set when that adjustment has to be made close to its maximum in the lower or upper part-load range, and the signal is too low. The fault may lie in a leak in the intake, the fuel pressure, the injectors, the mass air flow sensor, the lambda sensor or the fuel.

    Mögliche Ursachen

    • Air leakage in the intake system
    • High fuel pressure
    • Leaking injectors
    • Damaged mass air flow (MAF) sensor
    • Damaged heated oxygen sensor (HO2S)
    • Incorrectly calculated ethanol content

    Was Sie tun können

    1. 1Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
    2. 2Check the intake system for air leakage, such as cracked hoses and loose clamps
    3. 3Have a workshop measure the fuel pressure and check whether the injectors leak
    4. 4Look at the engine oil for contamination and check that the level sits between the min and max marks
    5. 5Check that the mass air flow sensor is not damaged or dirty
    6. 6Replace the lambda sensor if nothing else is found, since a damaged lambda sensor can also set this code

    Symptome, die Sie bemerken können4

    • The malfunction indicator lamp (MIL) is lit
    • The car hesitates or surges when accelerating
    • The idle is uneven
    • The engine does not start and only cranks

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.