Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P219A00
    VOLVO

    ECM-P219A00 - Bank 1 Air-Fuel Ratio Imbalance. General Failure Information. No sub type information

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    9 Modelle

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (18)
    • Volvo S60 (2011–)2013Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
    • Volvo S60 (2011–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14
    • Volvo S80 (2007–)2013Nur Motor: B5254T12, B5254T14
    • Volvo S80 (2007–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14
    • Volvo S80 (2007–)2015Nur Motor: B4204T11, B4204T12, B4204T15
    • Volvo V40 (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
    • Volvo V40 (2013–)2015Nur Motor: B4204T11, B5204T8, B5204T9
    • Volvo V40 Cross Country (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
    • Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, D4162T, D4204T14, D5204T6
    • Volvo V60 (2011–)2013Nur Motor: B5204T8, B5204T9
    • Volvo V60 (2011–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12
    • Volvo V60 (2011–)2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2013Nur Motor: B5204T9
    • Volvo V70 (2008–)2014–2015Nur Motor: B4204T11, B5204T9
    • Volvo XC60 (2009–)2014Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo XC60 (2009–)2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B5254T14
    • Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11

    Was bedeutet der Fehlercode?

    The engine control module (ECM) monitors combustion in each cylinder using the front and rear lambda sensors and engine speed. The code is set when one cylinder gets too much fuel or too little air compared with the others. The fault may lie in an injector, an ignition coil, a leak in the manifolds or the lambda sensors.

    Mögliche Ursachen

    • Damaged or leaking fuel injector
    • Damaged ignition coil or spark plug
    • Air leak at the intake manifold
    • Air leak at the exhaust manifold
    • Damaged front heated oxygen sensor (HO2S)
    • Damaged rear heated oxygen sensor (HO2S)

    Was Sie tun können

    1. 1Read the fault codes for the injectors, ignition coils and lambda sensors first and fix them, since this code can be a follow-on fault
    2. 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
    3. 3Have a workshop check the injector valves for leakage
    4. 4Check the intake and exhaust manifolds for air leaks, especially where a leak would affect only one cylinder
    5. 5Check the spark plugs and ignition coils for damage
    6. 6Replace the lambda sensor if the fault remains after these checks, since a defective front or rear sensor can rarely cause this code

    Symptome, die Sie bemerken können3

    • The malfunction indicator lamp lights up or behaves abnormally
    • The idle is uneven
    • The car hesitates, surges or runs jerkily, both during acceleration and at steady speed

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.