VOLVO
ECM-P222792 - Barometric Pressure Sensor A Circuit Range/Performance. Component Failures. Performance or incorrect operation
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
10 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (24)
- Volvo S60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo S60 (2011–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2010Nur Motor: B6304T2, B6324S
- Volvo S80 (2007–)2011–2012, 2015Nur Motor: B6304T4, B6324S5
- Volvo S80 (2007–)2013–2014Nur Motor: B5254T12, B5254T14, B6304T4, B6324S5
- Volvo V40 (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Nur Motor: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo V60 (2011–)2013Nur Motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Nur Motor: B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Nur Motor: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Nur Motor: B6304T2, B6324S
- Volvo V70 (2008–)2011–2012Nur Motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013–2014Nur Motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Nur Motor: B5204T9, B6304T4
- Volvo XC60 (2009–)2010Nur Motor: B6304T2, B6324S
- Volvo XC60 (2009–)2011–2014Nur Motor: B6304T4, B6324S5
- Volvo XC60 (2009–)2015Nur Motor: B5204T9, B5254T12, B5254T14, B6304T4, B6324S5
- Volvo XC70 (2008–)2010Nur Motor: B6304T2, B6324S
- Volvo XC70 (2008–)2011–2015Nur Motor: B6304T4, B6324S5
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The module compares the filtered signal from the sensor to the intake manifold with the signal from its own atmospheric pressure sensor. The code is set when the difference between the two signals becomes larger than allowed, and it can only be checked once the ignition has been on for a while.
Mögliche Ursachen
- Damaged manifold absolute pressure (MAP) sensor
- Damaged engine control module (ECM)
Was Sie tun können
- 1First check whether other air pressure codes are stored, both for the internal sensor and the intake manifold sensor. Diagnose those before this code
- 2With a diagnostic tool, read the pressure values in live data with the ignition on and see whether the intake sensor and the internal sensor show roughly the same pressure
- 3Check the wiring and connectors to the intake manifold sensor for contact resistance, oxidation, shorts to earth or voltage, and breaks
- 4Try a new intake manifold sensor and check whether the difference between the sensors disappears
- 5If the difference remains, the module's internal sensor is damaged. It cannot be replaced alone, so have a workshop replace the module
Symptome, die Sie bemerken können1
- Check engine lamp comes on or behaves abnormally
Was der Fehler beeinflussen kann1
- The engine control uses the intake manifold sensor value if it is fault-free, otherwise a fixed fallback value
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.