VOLVO
ECM-P224600 - O2 Sensor Reference Voltage Circuit High - Bank 1, Sensor 1. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2008Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2009Nur Motor: D5244T10, D5244T4, D5244T5
- Volvo V70 (2008–)2008Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2009Nur Motor: D5244T10, D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The module reads the front heated oxygen sensor, which reports on the fuel and air mixture. The code is set when the signal from the sensor is faulty, here at a high level.
Mögliche Ursachen
- Signal wire shorted to supply voltage
- Short to earth on the signal wire
- Open circuit in the signal wire
- Contact resistance or oxidation in the connections
- Earth wire shorted to supply voltage
- Damaged oxygen sensor
Was Sie tun können
- 1Check that the fuses are intact
- 2Check the sensor connections for contact resistance and oxidation. Rust-dissolving spray and grease do not belong in the connector
- 3Use a multimeter to check that the signal wire and the earth wire are not shorted to supply voltage
- 4If the wiring is in order, try a new oxygen sensor. Have a workshop diagnose further if the fault remains
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.