VOLVO
ECM-P229100 - Injector Control Pressure Too Low - Engine Cranking. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011–2015Nur Motor: D4162T
- Volvo S80 (2007–)2012–2015Nur Motor: D4162T
- Volvo V40 (2013–)2013–2015Nur Motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011–2015Nur Motor: D4162T
- Volvo V70 (2008–)2012–2015Nur Motor: D4162T
Was bedeutet der Fehlercode?
The module measures rail pressure through the fuel pressure sensor and regulates it with the fuel pressure control valve. The code is set during starting when fuel pressure is too low even though the control valve is fully open.
Mögliche Ursachen
- Low fuel level
- Blocked fuel filter
- Leakage in the fuel lines
- Damaged fuel pump
- Damaged fuel pressure control valve or fuel pressure sensor
- Damaged or clogged return line from the injectors, or damaged injectors
Was Sie tun können
- 1Check the fuel level in the tank. If it is low, add fuel
- 2Check the fuel system for leaks and whether the fuel filter is blocked
- 3Check the injectors for leakage
- 4Check the connector and wiring of the fuel pressure sensor for contact resistance, oxidation and breaks
- 5If the fault remains, have a workshop with diagnostic equipment check the fuel pump and the fuel pressure control valve
Symptome, die Sie bemerken können1
- The engine is hard to start and cranks slowly, sometimes or all the time
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.