VOLVO
ECM-P229900 - Brake Pedal Position/Accelerator Pedal Position Incompatible. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Was bedeutet der Fehlercode?
The module keeps watch on the brake light switch. The code is set when readings from the brake pedal sensor and the brake light switch contradict each other.
Mögliche Ursachen
- Loose connections or contact resistance and oxidation in the terminals
- Damaged brake light switch
- Damaged brake pedal position sensor
- Loose contact or contact resistance in the accelerator pedal switch
- Wiring is shorted to earth or supply voltage
- Open circuit in the cable to the accelerator pedal switch
Was Sie tun können
- 1Clear the code, drive the car in normal driving and read again to see whether it returns
- 2Check that the connectors at the brake pedal and the accelerator pedal are secure and not corroded
- 3Use a multimeter to check that the wires to the accelerator pedal switch and the brake light switch have no break and are not shorted to earth or supply voltage
- 4If the fault remains, have a workshop with diagnostic equipment check the brake pedal sensor and the brake light switch
- 5Do not drive longer than necessary with the fault active, as the engine control then cannot rely on the pedal signals
Symptome, die Sie bemerken können1
- Text message and warning symbol in the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.