VOLVO
ECM-P230300 - Ignition Coil B Primary Control Circuit Low. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
The module monitors the signal wire feeding the primary winding of ignition coil 2. The code is set when the signal to the primary winding is too low.
Mögliche Ursachen
- Signal wire shorted to earth
- Damaged ignition coil
Was Sie tun können
- 1Clear the code, drive the car and read again to see whether it returns
- 2Use a multimeter to check that the signal wire to ignition coil 2 is not shorted to earth
- 3If the wire is in order, ignition coil 2 may be damaged and need replacing
- 4If the fault remains, have a workshop with diagnostic equipment diagnose further
Symptome, die Sie bemerken können2
- Malfunction indicator lamp (MIL) lit
- Misfiring, so not every cylinder fires
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.