Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P233800
    VOLVO

    ECM-P233800 - Cylinder #3 Above Knock Threshold. General Failure Information. No sub type information

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    2 Modelle

    S80 (2007–), V70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (2)
    • Volvo S80 (2007–)2008–2011Nur Motor: B4204S3, B4204S4
    • Volvo V70 (2008–)2008–2011Nur Motor: B4204S3, B4204S4

    Was bedeutet der Fehlercode?

    The knock sensor on the engine block is used by the engine control module (ECM) to monitor combustion knock, and the ignition is adjusted when needed. The code is set once knocking from cylinder 3 rises above a certain level, and

    Mögliche Ursachen

    • The engine runs on a fuel/air mixture that is too lean
    • Poor fuel quality, for example summer fuel in winter
    • The engine is overheated
    • The intake air temperature is too high
    • The knock sensor is loosely fitted
    • The knock sensor is damaged

    Was Sie tun können

    1. 1Check that the relevant fuses are intact; their locations are shown in the car's owner's manual
    2. 2Read and note the code, clear it and test drive to see whether it returns
    3. 3Check that the knock sensor is firmly fitted and that its connector is free from corrosion
    4. 4Check that the fuel in use is right for the season
    5. 5If you have a diagnostic tool, see whether the intake air temperature in live data follows the outside temperature
    6. 6If the fault returns, have a workshop with diagnostic equipment check the knock sensor and the engine's fuel/air mixture

    Symptome, die Sie bemerken können1

    • The engine performs poorly

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.