VOLVO
ECM-P241400 - O2 Sensor Exhaust Sample Error Bank 1, Sensor 1. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (24)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, B5254T5, D4162T
- Volvo S60 (2011–)2012Nur Motor: B4164T, B4164T2, B4164T3, B5254T5, D4162T
- Volvo S60 (2011–)2013–2015Nur Motor: B4164T, B4164T2, B4164T3, D4162T
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2011Nur Motor: B4164T, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B4164T, B4164T2, B5254T10, D4162T
- Volvo S80 (2007–)2013–2014Nur Motor: B4164T, B4164T2, D4162T
- Volvo S80 (2007–)2015Nur Motor: B4164T, D4162T
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T, D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, D4162T
- Volvo V60 (2011–)2012–2015Nur Motor: B4164T, B4164T2, B4164T3, D4162T
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2011Nur Motor: B4164T, B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B4164T, B4164T2, B5254T10, D4162T
- Volvo V70 (2008–)2013–2015Nur Motor: B4164T, B4164T2, D4162T
Was bedeutet der Fehlercode?
The engine control module (ECM) checks the signal from the front oxygen sensor, which measures the fuel/air mixture in the exhaust gases. The code is set when the signal is incorrect, for example if the sensor only indicates air and no mixture. The fault applies to bank 1 and sensor 1, that is, the front sensor on the first bank.
Mögliche Ursachen
- Incorrectly installed heated oxygen sensor
- Damaged front heated oxygen sensor
- Poor contact or oxidation at connectors or joints
- Damaged heated oxygen sensor
Was Sie tun können
- 1Check that the oxygen sensor is correctly installed in the exhaust system
- 2Inspect the oxygen sensor connector for loose contacts and oxidation. Do not use rust-solvent spray or grease in the connector
- 3Use a multimeter to check that the wires to the oxygen sensor have no open circuit
- 4If the fault remains after these checks, have a workshop try a new oxygen sensor
- 5If the fault still remains, have a workshop decide whether the engine control module has an internal fault, which is remedied by replacing the module
Symptome, die Sie bemerken können2
- The malfunction indicator lamp lights up
- The engine warning lamp (Check engine) lights up or behaves abnormally
Was der Fehler beeinflussen kann2
- The oxygen sensor control is disabled
- The catalytic converter diagnostics are disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.