VOLVO
ECM-P244D00 - Exhaust Temperature Too High For Particulate Filter Regeneration, Bank 1. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011–2015Nur Motor: D4162T
- Volvo S80 (2007–)2012–2015Nur Motor: D4162T
- Volvo V40 (2013–)2013–2015Nur Motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011–2015Nur Motor: D4162T
- Volvo V70 (2008–)2012–2015Nur Motor: D4162T
Was bedeutet der Fehlercode?
This fault applies to bank 1. The engine control module (ECM) keeps an eye on the front exhaust temperature sensor after the catalytic converter and makes additional checks for high exhaust heat. The code is set when the exhaust temperature is too high, and regeneration of the particle filter is then blocked, since very high temperatures could cause uncontrolled burning of soot in the filter.
Mögliche Ursachen
- Damaged exhaust temperature sensor after the catalytic converter
- A fault covered by another fault code, which should be traced first
- Too much diesel in the engine oil
- Contaminated engine oil
- Knock-on fault from a fault found by another code test on the injectors and/or fuel system
- Damaged injection valves
Was Sie tun können
- 1Check the oil dipstick: if the level has risen or the oil smells strongly of diesel, that may be the cause
- 2Inspect the exhaust temperature sensor after the catalytic converter and its connector for loose contacts and oxidation
- 3Deal with other fault codes stored in the control module first, since this code may be a knock-on fault
- 4If you have a diagnostic tool, follow the exhaust temperature in live data with the engine running and see whether it rises sharply
- 5Have a workshop with diagnostic equipment check the injection valves and the fuel system, since the code may come from there
Symptome, die Sie bemerken können5
- The engine warning lamp (Check engine) lights up or behaves abnormally
- A warning symbol and a text message appear in the display
- The car runs poorly and lacks power
- The engine stalls, either now and then or all the time
- The engine stalls on starting
Was der Fehler beeinflussen kann3
- The engine is switched off
- Engine output and speed are limited
- EGR control and soot burning are lost
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.