VOLVO
ECM-P245384 - Diesel Particulate Filter Pressure Sensor A Circuit Range/Performance. Bus Signal / Message Failures. Signal below allowable range
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
12 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (41)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011Nur Motor: D4162T, D5204T2, D5244T10
- Volvo S60 (2011–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2009Nur Motor: D5244T10
- Volvo S80 (2007–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Nur Motor: D5204T2, D5244T10
- Volvo S80 (2007–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Nur Motor: D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Nur Motor: D4162T, D5204T4, D5204T6
- Volvo V40 (2013–)2015Nur Motor: D4162T, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4162T, D5204T6
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011Nur Motor: D4162T, D5204T2, D5244T10
- Volvo V60 (2011–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V60 (2011–)2014Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo V60 (2011–)2015Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo V70 (2008–)2009Nur Motor: D5244T10
- Volvo V70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Nur Motor: D5204T2, D5244T10
- Volvo V70 (2008–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo V70 (2008–)2015Alle Motoren außer: B4164T, B4164T2, B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Nur Motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle Motoren außer: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Alle Motoren außer: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Nur Motor: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
Was bedeutet der Fehlercode?
Although the code is named signal below allowable range, it applies when the signal from the particle filter pressure sensor is incorrect. The engine control module (ECM) checks the pressure before and after the filter and compares the signal with a calculated value.
Mögliche Ursachen
- Hoses or pipes to the particle filter pressure sensor have been swapped
- Damaged particle filter pressure sensor
Was Sie tun können
- 1Check that the hoses to the particle filter pressure sensor have not been swapped
- 2If you have a diagnostic tool, read the pressure sensor signal in live data, both with the engine running and after it has been switched off
- 3If the fault returns, have a workshop check the pressure sensor and the particle filter with diagnostic equipment
- 4Have a workshop decide whether the particle filter pressure sensor is damaged and needs replacing
Symptome, die Sie bemerken können4
- The engine performs worse
- The engine warning lamp (Check engine) lights up or behaves abnormally
- A warning symbol and a text message appear in the display
- The car runs poorly and lacks power
Was der Fehler beeinflussen kann3
- Engine torque is limited
- Exhaust gas recirculation (EGR) control is lost
- Burning of soot particles does not take place
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.