VOLVO
ECM-P246300 - Diesel Particulate Filter Restriction - Soot Accumulation (Bank 1). General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
11 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (17)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011–2013Nur Motor: D4162T
- Volvo S60 (2011–)2014–2015Nur Motor: D4162T, D4204T5
- Volvo S80 (2007–)2012–2013Nur Motor: D4162T
- Volvo S80 (2007–)2014–2015Nur Motor: D4162T, D4204T5
- Volvo V40 (2013–)2013–2014Nur Motor: D4162T
- Volvo V40 (2013–)2015Nur Motor: D4162T, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: D4162T
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4162T, D4204T14
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011–2013Nur Motor: D4162T
- Volvo V60 (2011–)2014–2015Nur Motor: D4162T, D4204T5
- Volvo V70 (2008–)2012–2013Nur Motor: D4162T
- Volvo V70 (2008–)2014–2015Nur Motor: D4162T, D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The ECM tracks how much soot is in the diesel particulate filter. The code is stored as a first level when the soot level has exceeded a certain limit and the pressure difference across the filter is too great. If the soot level keeps rising, ECM-P24A400 is also stored.
Mögliche Ursachen
- Clogged particle filter with too much soot in it
- Soot combustion insufficient or blocked
- Increased soot generation by the engine, for example from an EGR fault or air leakage in the intake
- Air leakage in the intake system
- Damaged pressure sensor for the particle filter
- The vehicle has been driven a lot in urban traffic
Was Sie tun können
- 1If you have a diagnostic tool, read the amount of soot in the particle filter to see how much soot it holds
- 2Drive the car a longer distance on country roads, preferably with cruise control, so that the engine control module can start soot combustion during normal driving
- 3If the particle filter fills quickly or often, look for leaks and damage in the intake system, for example in hoses and pipes
- 4Check that the connector at the particle filter pressure sensor is secure and free from oxidation
- 5If ECM-P24A400 is also stored, have a workshop diagnose that code
Symptome, die Sie bemerken können2
- The Check engine lamp may come on or behave abnormally
- Yellow warning symbol and text message in the display
Was der Fehler beeinflussen kann2
- EGR control does not take place
- Soot combustion does not take place
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.