VOLVO
ECM-P250A17 - Engine Oil Level Sensor Circuit. General Electrical Failures. Circuit voltage above threshold
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The ECM keeps track of engine oil level. The code is stored when the calculated value falls outside its permitted range. Diesel can mix into the oil during particle filter regeneration, which raises the oil level, and then the code for low oil quality may be stored at the same time.
Mögliche Ursachen
- Oil level too high
Was Sie tun können
- 1Check the oil level with the dipstick to see whether it really is too high
- 2If the engine oil is diluted with diesel, an oil change is needed. If the level is too high, excess oil can be drained out
- 3Have a workshop adapt the control module's calculated oil level to the actual level after an oil change or draining
- 4If the code for low oil quality is also stored, they often have the same cause, so fault-trace them together
Symptome, die Sie bemerken können2
- Incorrect fluid level in the lubrication system
- Text message in the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.