VOLVO
ECM-P250A1C - Engine Oil Level Sensor Circuit. General Electrical Failures. Circuit voltage out of range
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
Although the code is named circuit voltage out of range, it concerns the calculated average value of the engine oil level. The ECM monitors the oil level and stores the code when that average is incorrect.
Mögliche Ursachen
- Oil level too low
- Contact resistance or oxidation in the terminals (see also ECM-P250A16)
- Damaged oil level sensor
Was Sie tun können
- 1Read the fault status with the ignition on and note whether the fault is still active
- 2Check that the relevant fuses are intact
- 3Check the oil level with the dipstick and compare it with what seems reasonable for the car
- 4Check the connector to the oil level sensor for contact resistance and oxidation
- 5If the fault remains after these checks, have a workshop assess the oil level sensor
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.