VOLVO
ECM-P250B64 - Engine Oil Level Sensor Circuit Intermittent/Erratic. Algorithm Based Failures. Signal plausibility failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
The fault is recorded as intermittent, which means it has been present but is not necessarily present now. The ECM monitors the sensor output and stores the code when it falls outside a reasonable operating range. This may be caused by an oil level that is too high or a damaged oil level sensor.
Mögliche Ursachen
- Oil level too high
- Damaged oil level sensor
Was Sie tun können
- 1Read the fault status with the engine idling. If the code is not active, the fault may be sporadic
- 2Check the oil level with the dipstick and see whether it is above the marked level
- 3Check that the relevant fuses are intact
- 4If you have a diagnostic tool, read the oil level value in live data at idle and compare it with the dipstick
- 5If the fault returns, have a workshop with diagnostic equipment check the oil level sensor
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.