Was bedeutet der Fehlercode ECM-P250E00?

Diagnose und Fehlercodedefinition für ECM-P250E00 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo S80 (2007–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P250E00 - Engine Oil Level Sensor Circuit Intermittent/Erratic. General Failure Information. No sub type information

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

9 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

Modelle nach Baujahr und Motor anzeigen (10)

Was bedeutet der Fehlercode?

The fault is recorded as intermittent, which means it may have been present without necessarily being present now. The ECM monitors the oil level with the sensor and stores the code when the signal is disturbed or when the oil level changes very quickly. This may be caused by an oil leak, poor contact or a damaged sensor.

Mögliche Ursachen

Rapid oil level change, for example from an oil leak
Loose plug, resistance or oxidation at the connections
Damaged oil level sensor

Was Sie tun können

1Check the engine for heavy oil leakage and for oil marks under the car
2Check the oil level with the dipstick. If it drops quickly between checks, this may be due to a leak
3Check the connector to the oil level sensor for looseness, contact resistance and oxidation; clean and remedy it if needed
4The test runs during road driving, so a test drive shows whether the fault is still there
5If the fault returns, have a workshop with diagnostic equipment check the oil level sensor

Symptome, die Sie bemerken können1

No noticeable symptoms for the driver

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.