VOLVO
ECM-P250F00 - Engine Oil Level Too Low. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Nur Motor: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11, D4204T5
Was bedeutet der Fehlercode?
Although the code is named oil level too low, it is set when the calculated level goes above a limit. The ECM monitors the oil level with the oil level sensor. A low oil level is given as a possible cause, so check the actual level first.
Mögliche Ursachen
- Oil level too low
Was Sie tun können
- 1Check the oil level with the dipstick and note whether it is too high or too low
- 2Check that the relevant fuses are intact
- 3If you have a diagnostic tool, read the fault status with the engine running and see whether the fault is still active
- 4If the oil level is too high, excess oil can be drained out; if it is too low, top up with the correct oil
- 5If the fault remains after these checks, have a workshop with diagnostic equipment check the oil level sensor
Symptome, die Sie bemerken können2
- Incorrect fluid level in the lubrication system
- Text message in the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.