VOLVO
ECM-P251368 - Event Data Recorder Request Circuit High. Algorithm Based Failures. Event information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
This is an event-controlled information code and does not show a fault in the control module. It is set when the engine speed has been outside the limit for engine stop. The causes are given as an overloaded engine or an incorrectly calculated ethanol content.
Mögliche Ursachen
- No fault that needs remedying causes this; the code is informational.
- Overloaded engine
- Incorrectly calculated ethanol content
Was Sie tun können
- 1No special fault-tracing is needed for this code, since it is an information code
- 2If the engine has been heavily overloaded, this may explain the code
- 3Check that the fuel you have filled up with is of the type the car is intended for, since an unexpected ethanol content can give a wrong calculation
- 4If you have a diagnostic tool, read the fault status with the engine running to see whether the code is active now
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.