VOLVO
ECM-P251468 - Event Data Recorder Request Circuit High. Algorithm Based Failures. Event information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
This is an event-controlled information code and does not show a fault in the control module. It is set when the start time has been outside a limit value for a certain period. The cause is given as an incorrectly calculated ethanol content.
Mögliche Ursachen
- No fault that needs remedying causes this; the code is informational.
- Incorrectly calculated ethanol content
Was Sie tun können
- 1No fault-tracing is needed for the code, since it is only information
- 2If you have recently filled up with fuel of a different ethanol content than usual, this may explain the code
- 3If you have a diagnostic tool, read the start time in live data at start-up and see whether it is unusually long
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.