VOLVO
ECM-P253300 - Ignition Switch Run/Start Position Circuit. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011–2015Nur Motor: D4162T
- Volvo S80 (2007–)2012–2015Nur Motor: D4162T
- Volvo V40 (2013–)2013–2015Nur Motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011–2015Nur Motor: D4162T
- Volvo V70 (2008–)2012–2015Nur Motor: D4162T
Was bedeutet der Fehlercode?
The ECM monitors the ignition position and the voltage levels at the inputs for the 15 and 50 supply. The code is stored when the ignition is in the start position but the ECM has never received voltage on the 15-supply input in position II. Possible causes are faulty circuits for the 15 or 50 supply.
Mögliche Ursachen
- Incorrect circuit for the 15 supply
- Incorrect circuit for the 50 supply
Was Sie tun können
- 1Check that the relevant fuses are intact
- 2Check that the ignition switch works in position II and in the start position, and that it can be moved between the positions
- 3Use a multimeter to check that the 15-supply is present in position II and the 50-supply is present in the start position
- 4Check the connectors to the engine control module for contact resistance and oxidation
- 5If the fault remains, have a workshop check the 15 and 50 supply circuits
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.