VOLVO
ECM-P258382 - Cruise Control Front Distance Range Sensor. Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (13)
- Volvo S60 (2011–)2011–2014Nur Motor: B6304T4
- Volvo S60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Nur Motor: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Nur Motor: B6304T2, B6324S, B8444S
- Volvo V60 (2011–)2011–2014Nur Motor: B6304T4
- Volvo V60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2008–2009Nur Motor: B6304T2, B6324S
- Volvo XC60 (2009–)2009–2010Nur Motor: B6304T2
- Volvo XC60 (2009–)2011–2015Nur Motor: B6304T4
- Volvo XC70 (2008–)2008Nur Motor: B6324S
- Volvo XC70 (2008–)2009Nur Motor: B6304T2, B6324S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The engine control module (ECM) receives information from the forward sensing module (FSM) all the time over the CAN network. This code is set when that communication stops. Even though the code is named after a sequence counter, it means the signal from the forward sensing module is not getting through.
Mögliche Ursachen
- Open circuit in the communication wire
- Communication wire shorted to ground or to supply voltage
- Contact resistance or oxidation at the connectors
- Open or short circuit at the connectors
Was Sie tun können
- 1Read the codes across the whole car and fix the CAN-related codes first, as this code can be caused by them
- 2Check that the fuses are intact
- 3Check the wiring to the forward sensing module (FSM) for chafing, pinch damage and breaks
- 4Check that the connectors are firmly seated and free from oxidation
- 5If you have a diagnostic tool: check that the FSM appears and responds in the list of control modules
- 6If none of this finds anything, have a workshop with diagnostic equipment measure the communication on the CAN network
Symptome, die Sie bemerken können2
- Cruise control does not work at all
- Cruise control cannot be engaged
Was der Fehler beeinflussen kann1
- Cruise control is switched off while the fault is active
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.