VOLVO
ECM-P261062 - ECM/PCM Engine Off Timer Performance. Algorithm Based Failures. Signal compare failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (12)
- Volvo S60 (2011–)2011Nur Motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Nur Motor: B4204T7
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011–2014Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4204T7
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Nur Motor: B4204T7
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
The engine control module (ECM) compares the real-time clock (RTC) value sent from the CEM with an estimated value. The estimate is based on how the available temperature signals normally change over time. The code is set when the clock value does not agree with that estimate.
Mögliche Ursachen
- Interference on the CAN network
- Damaged central electronic module (CEM)
Was Sie tun können
- 1Read the codes in the CEM and note whether any CAN-related codes are present
- 2Check that the fuses are intact and that the CAN connectors, especially at the CEM, are firmly seated
- 3If the code returns, have a workshop check the CEM, which may be damaged
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.