VOLVO
ECM-P261064 - ECM/PCM Engine Off Timer Performance. Algorithm Based Failures. Signal plausibility failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (12)
- Volvo S60 (2011–)2011Nur Motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Nur Motor: B4204T7
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011–2014Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4204T7
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Nur Motor: B4204T7
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
The engine control module (ECM) takes in the real-time clock signal from the CEM and checks it against an estimated value. The code is set when the signal is not plausible compared with that estimate, and the estimate is based on how different temperatures normally change over time.
Mögliche Ursachen
- Interference on the CAN network
- Damaged central electronic module (CEM)
Was Sie tun können
- 1Read the codes in the CEM and see whether any CAN-related codes are stored
- 2Check the CAN connectors at the CEM and the engine control module
- 3If you have a diagnostic tool: check that the CEM responds and appears in the list of control modules
- 4If the code returns after work, have a workshop decide whether the CEM is damaged
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.