VOLVO
ECM-P261400 - Camshaft Position Output Circuit / Open. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellS60 (2011–)
Modelle nach Baujahr und Motor anzeigen (1)
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors the signal from the camshaft position sensors for intake and exhaust. The code is set when the signal from both sensors is incorrect or missing, and it is always stored together with another signal-fault code for the camshaft position sensor.
Mögliche Ursachen
- No signal
- Faulty wiring to the camshaft position sensors
Was Sie tun können
- 1Read the codes and fix the separate signal-fault code for the camshaft position sensor first, since this code always comes with it
- 2Check the connectors to the intake and exhaust camshaft sensors for loose contacts and corrosion
- 3Check the sensor wiring for chafing and breaks
- 4If you have a diagnostic tool: check in live data that the camshaft sensor signal is present for both intake and exhaust
- 5If the code returns, have a workshop check whether the camshaft position sensor is damaged
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann3
- Camshaft control is switched off
- Diagnosis of camshaft control is switched off
- The basic boost pressure is used
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.