VOLVO
ECM-P263200 - Fuel Pump "B" Control Circuit/Open. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo S80 (2007–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2015Nur Motor: B4204T11
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4204T11
- Volvo V60 (2011–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9
- Volvo V70 (2008–)2014–2015Nur Motor: B4204T11
- Volvo XC60 (2009–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11
Was bedeutet der Fehlercode?
The engine control module (ECM) sets fuel pressure through the fuel pump control module (PEM) using a PWM signal. This code concerns fuel pump B and is set when the PWM link from the engine control module to the fuel pump module has no signal.
Mögliche Ursachen
- Open circuit in the signal wire
- Damaged fuel pump control module
Was Sie tun können
- 1If you have a diagnostic tool: read the frozen values and fault counter of the code to see when the fault occurred
- 2Check that the fuse for the fuel pump is intact
- 3Check the connectors and the wire between the engine control module and the fuel pump control module for breaks and chafing
- 4If you have a diagnostic tool, read the fuel pressure in live data and see whether it follows the pressure the engine control module requests
- 5If nothing is found, have a workshop check the fuel pump control module
Symptome, die Sie bemerken können2
- Engine cranks but does not start
- Engine may stall while driving
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.