VOLVO
ECM-P263500 - Fuel Pump "A" Low Flow / Performance. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo S80 (2007–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2015Nur Motor: B4204T11
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4204T11
- Volvo V60 (2011–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9
- Volvo V70 (2008–)2014–2015Nur Motor: B4204T11
- Volvo XC60 (2009–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11
Was bedeutet der Fehlercode?
The code is set when the actual fuel pressure does not reach the lowest permitted level. The fuel pressure is controlled through the fuel pump control module with a PWM signal, and the cause is a damaged high-pressure pump, which then cannot deliver enough fuel.
Mögliche Ursachen
- Damaged high-pressure pump
Was Sie tun können
- 1If you have a diagnostic tool: read the frozen values and fault counter of the code to see how often it has occurred
- 2Check that there is enough fuel in the tank
- 3If you have a diagnostic tool: read the actual fuel pressure in live data with the engine running and see whether it is low
- 4If nothing is found, have a workshop decide whether the high-pressure pump needs replacing
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- The high-pressure pump does not deliver enough fuel
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.