Was bedeutet der Fehlercode ECM-P263868?

Diagnose und Fehlercodedefinition für ECM-P263868 (Volvo C30 (2007–2013), Volvo C70 (2006–2013), Volvo C70 (2006–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P263868 - Torque Management Feedback Signal A Range / Performance. Algorithm Based Failures. Event information

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

12 Modelle

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (40)

Was bedeutet der Fehlercode?

This is an event-controlled code. It is meant as information and does not indicate any defect in the module where it is active. The engine control module (ECM) monitors engine torque and sets the code when torque goes above a certain recommended level.

Mögliche Ursachen

Fault in the injection system
Faulty software in the engine control module
Damaged engine control module (ECM)

Was Sie tun können

1Read any other codes in the engine control module and deal with those first, since this code only shows that torque has been high
2Have a workshop with diagnostic equipment check the injection system
3If you have a diagnostic tool: read engine torque in live data and see whether it follows the accelerator
4If nothing is found, have a workshop check the software in the engine control module; it should only be reloaded if it was changed unintentionally or damaged

Symptome, die Sie bemerken können1

Text message and warning symbol in the display

Was der Fehler beeinflussen kann2

Engine speed is limited
Torque is limited by cutting off the fuel supply

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.