VOLVO
ECM-P263E00 - Glow Plug Control Module 1 Over Temperature. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The ECM drives the glow plugs via glow plug control module 1. The code is set when the glow plug module's own temperature reading is too high. This can be caused by an ambient temperature that is too high or by a damaged glow plug control unit, and the glow plugs are then limited.
Mögliche Ursachen
- Ambient temperature too high
- Damaged glow plug control unit
Was Sie tun können
- 1With the ignition on, read whether the code is active or only stored
- 2Let the car cool down and then start it again to see whether the code returns
- 3If you have a diagnostic tool: read the glow plug module temperature in live data while the engine is cold
- 4If the code returns once the glow plug module has cooled, have a workshop decide whether it is damaged
Symptome, die Sie bemerken können2
- Engine is hard to start and cranks slowly
- Starting becomes harder in cold weather
Was der Fehler beeinflussen kann1
- Glow plug operation is limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.