VOLVO
ECM-P267813 - Coolant Degassing Valve Control Circuit / Open. General Electrical Failures. Circuit open
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
6 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (11)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3
- Volvo S60 (2011–)2012–2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2011, 2015Nur Motor: B4164T
- Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3
- Volvo V60 (2011–)2012–2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2011Nur Motor: B4164T
- Volvo V70 (2008–)2012–2015Nur Motor: B4164T, B4164T2
Was bedeutet der Fehlercode?
The engine control module (ECM) drives a solenoid for the coolant degassing valve (Degas), which is used to regulate engine temperature more efficiently. The code is set when there is an open circuit between the engine control module and that solenoid.
Mögliche Ursachen
- Damaged solenoid
- Open circuit on the signal wire
- Damaged connector
- Damaged engine control module (ECM)
Was Sie tun können
- 1Check that the fuses for the solenoid are intact
- 2Check the connector at the solenoid for damage and loose contacts
- 3Follow the signal wire between the engine control module and the solenoid and look for a break with a multimeter
- 4If you have a diagnostic tool: activate the solenoid and check that it responds
- 5If nothing is found, have a workshop decide whether the solenoid or the engine control module is damaged
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.