Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P268012
    VOLVO

    ECM-P268012 - Coolant Degassing Valve Control Circuit High. General Electrical Failures. Circuit short to battery

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    6 Modelle

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (11)
    • Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3
    • Volvo S60 (2011–)2012–2015Nur Motor: B4164T, B4164T2, B4164T3
    • Volvo S80 (2007–)2011, 2015Nur Motor: B4164T
    • Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2
    • Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
    • Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
    • Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
    • Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3
    • Volvo V60 (2011–)2012–2015Nur Motor: B4164T, B4164T2, B4164T3
    • Volvo V70 (2008–)2011Nur Motor: B4164T
    • Volvo V70 (2008–)2012–2015Nur Motor: B4164T, B4164T2

    Was bedeutet der Fehlercode?

    The engine control module (ECM) drives the solenoid for the Degas valve, which regulates engine temperature more efficiently. The code is set when the signal is higher than a set level as the solenoid is activated. The cause may be a signal wire shorted to supply voltage, a damaged solenoid, a damaged connector or the engine control module.

    Mögliche Ursachen

    • Signal wire shorted to supply voltage
    • Damaged solenoid
    • Damaged connector
    • Damaged engine control module (ECM)

    Was Sie tun können

    1. 1Check that the fuse for the solenoid has not blown
    2. 2Use a multimeter to check that the signal wire to the solenoid has no contact with the positive supply
    3. 3Check the connector at the solenoid for damage
    4. 4If you have a diagnostic tool: read the control signal to the solenoid in live data when it is activated
    5. 5If nothing is found, have a workshop with diagnostic equipment decide whether the fault lies in the solenoid or the engine control module

    Symptome, die Sie bemerken können2

    • Air conditioning does not work
    • Heater does not work

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.