VOLVO
ECM-P268113 - Engine Coolant Bypass Valve "A" Control Circuit/Open. General Electrical Failures. Circuit open
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
6 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (11)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3
- Volvo S60 (2011–)2012–2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2011, 2015Nur Motor: B4164T
- Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3
- Volvo V60 (2011–)2012–2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2011Nur Motor: B4164T
- Volvo V70 (2008–)2012–2015Nur Motor: B4164T, B4164T2
Was bedeutet der Fehlercode?
The engine control module (ECM) drives a solenoid for the bypass control valve, which helps regulate engine temperature more effectively. The code is set when the control module finds an open circuit between itself and that solenoid.
Mögliche Ursachen
- Damaged solenoid
- Open circuit on the signal wire
- Damaged connector
- Damaged engine control module (ECM)
Was Sie tun können
- 1Check the fuse that supplies the solenoid and the bypass valve
- 2Check the connector at the solenoid for damage and loose contacts
- 3Use a multimeter to check that the signal wire to the solenoid is continuous
- 4With a diagnostic tool you can control the solenoid and see whether it responds
- 5If nothing is found, have a workshop decide whether the solenoid or the engine control module is damaged
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.