VOLVO
ECM-P268D05 - Cylinder 2 Injector Data Incompatible. General Failure Information. System Programming Failures
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
Each injector has a memory circuit with data, and the ECM checks the value in the one for cylinder 2. Even though the code is named a programming failure, it is set when the memory value from the injector is incorrect, and the cause is an internal fault in the injector.
Mögliche Ursachen
- Internal fault in the injector
Was Sie tun können
- 1If you have a diagnostic tool, read the status of the code: active or only stored
- 2If the code returns, have a workshop with diagnostic equipment decide whether the injector for cylinder 2 needs replacing
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- The last value used from the injector is used instead
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.