VOLVO
ECM-P269600 - Injector data incompatible. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
Each injector has a memory circuit with data about that particular injector. The code is set when the engine control module (ECM) cannot store the memory value from an injector, and it is tested with the engine running. The last stored value from the injector is then used.
Mögliche Ursachen
- Internal fault in the injector
Was Sie tun können
- 1Read the code with a diagnostic tool and check whether it is active or only stored
- 2Clear the code and run the engine; if it comes back, it is the same fault
- 3Have a workshop check the injectors, since the fault lies in an injector's own memory circuit
- 4If the workshop finds no fault in the injectors, ask them to check how the engine control module stores the injector values
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- The engine control module keeps using the last stored value from the injector
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.