VOLVO
ECM-P26DB00 - Engine Sound Control "A" Circuit/Open. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
6 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2011–2014Nur Motor: B6304T4
- Volvo S60 (2011–)2015Nur Motor: B6304T4, B6304T5
- Volvo S80 (2007–)2011–2015Nur Motor: B6304T4
- Volvo V60 (2011–)2011–2014Nur Motor: B6304T4
- Volvo V60 (2011–)2015Nur Motor: B6304T4, B6304T5
- Volvo V70 (2008–)2011–2015Nur Motor: B6304T4
- Volvo XC60 (2009–)2011–2015Nur Motor: B6304T4
- Volvo XC70 (2008–)2011–2015Nur Motor: B6304T4
Was bedeutet der Fehlercode?
The engine control module (ECM) controls two exhaust dampers, one for each exhaust bank, which affect the engine sound. The code concerns the circuit for damper A and is set when the signal to the damper is missing.
Mögliche Ursachen
- Contact resistance and oxidation in the connections
- Open circuit in the signal wire
- The damaged exhaust damper
- Exhaust damper A is on the right-hand side as seen in the direction of travel
Was Sie tun können
- 1Check that the fuses are intact; their location is shown in the owner's manual
- 2Check that the connector to damper A is secure and free from oxidation and contact resistance
- 3Use a multimeter to check that the signal wire to damper A has no break to the engine control module
- 4With a diagnostic tool you can activate damper A and listen for it moving
- 5Have a workshop check damper A if the fault remains after the connector and wiring checks
Symptome, die Sie bemerken können3
- Unusual noise while driving, sometimes or all the time
- Unusual noise when the engine is switched off
- Unusual noise during acceleration
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.