VOLVO
ECM-P301A00 - Electrical Coolant Pump - Over Temperature. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo S80 (2007–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2015Nur Motor: B4204T11
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4204T11
- Volvo V60 (2011–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9
- Volvo V70 (2008–)2014–2015Nur Motor: B4204T11
- Volvo XC60 (2009–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11
Was bedeutet der Fehlercode?
The code concerns the control electronics of the electric water pump, where the engine control module (ECM) checks that the circuit board does not get too hot. It is set when the circuit board temperature is too high, and one of the causes is extreme heat conditions.
Mögliche Ursachen
- Extreme heat conditions
Was Sie tun können
- 1Read the code with a diagnostic tool and check whether it is active or only stored
- 2Check that the pump connector is secure and free from oxidation
- 3If you have a diagnostic tool: read the water pump status in live data while the engine runs and see whether it shows anything unusual
- 4Have a workshop check the pump if the fault returns, since the fault may sit in the pump's own electronics
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- The pump motor overheats
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.