VOLVO
ECM-U010387 - Lost Communication With Gear Shift Control Module A. Bus Signal / Message Failures. Missing message
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Nur Motor: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11, D4204T5
Was bedeutet der Fehlercode?
The ECM watches TCM signals and also waits for the gear selector (GSM) signal. The code is set when the signal from the gear selector is missing, and the cause may be an open circuit or a short circuit in the signal wire.
Mögliche Ursachen
- Open circuit or short circuit in the signal wire
Was Sie tun können
- 1Read the code with a diagnostic tool and see whether it is active or only stored
- 2Check that the connectors on the signal wire to the gear selector are secure and free from oxidation
- 3Use a multimeter to check that the signal wire to the gear selector has no break or short to ground or voltage
- 4Have a workshop check the gear selector and the signal wire if the fault remains
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.