ECM-U010407
VOLVO
ECM-U010407 - Lost Communication With Forward Sensing Module (FSM). General Failure Information. Mechanical Failures
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
10 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (32)
- Volvo S60 (2011–)2011Nur Motor: B6304T4, D5204T2, D5244T10
- Volvo S60 (2011–)2012Nur Motor: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo S60 (2011–)2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4162T, D4204T5
- Volvo S80 (2007–)2011Nur Motor: B6304T4, B6324S4, B6324S5, D5204T2, D5244T10
- Volvo S80 (2007–)2012Nur Motor: B6304T4, B6324S4, B6324S5, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013Alle Motoren außer: B4164T, B4164T2, B4204T6, B4204T7, D4162T
- Volvo S80 (2007–)2014Nur Motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Nur Motor: B6304T4, B6324S4, B6324S5, D5204T3, D5244T15
- Volvo V40 (2013–)2013Alle Motoren außer: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014Alle Motoren außer: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 (2013–)2015Nur Motor: B5204T8, B5204T9, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Alle Motoren außer: B4164T, D4162T
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, B4204T11, D4162T, D4204T14
- Volvo V60 (2011–)2011Nur Motor: B6304T4, D5204T2, D5244T10
- Volvo V60 (2011–)2012Nur Motor: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D82PHEV
- Volvo V60 (2011–)2014Nur Motor: B5204T8, B5204T9, B5254T12, B6304T4, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo V60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T11, B4204T12, B4204T15, B4204T9, D4162T, D4204T5, D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2011Nur Motor: B6304T4, B6324S5, D5204T2, D5244T10
- Volvo V70 (2008–)2012Nur Motor: B6304T4, B6324S5, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Alle Motoren außer: B4164T, B4164T2, B4204T7, D4162T
- Volvo V70 (2008–)2014Alle Motoren außer: B4164T, B4164T2, B4204T11, B4204T7, D4162T, D4204T5
- Volvo V70 (2008–)2015Alle Motoren außer: B4164T, B4164T2, B4204T11, D4162T, D4204T5
- Volvo XC60 (2009–)2011–2012Alle Motoren außer: B4204T6, B4204T7
- Volvo XC60 (2009–)2013Alle Motoren außer: B4204T7
- Volvo XC60 (2009–)2014–2015Alle Motoren außer: B4204T10, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, D4204T5
- Volvo XC70 (2008–)2011–2013
- Volvo XC70 (2008–)2014–2015Alle Motoren außer: B4204T11, D4204T5
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
Even though the code is named a mechanical fault, it concerns the communication between the engine control module (ECM) and the forward sensing module (FSM). The code is set when the communication stops, and then cruise control cannot be activated.
Mögliche Ursachen
- Open circuit in one of the CAN wires
- Short circuit between the CAN wires
- Communication cable shorted to ground or voltage
- Contact resistance, oxidation or open circuit in the connections
- The engine control module is not intended for the car, for example a used module with other software or hardware
- The fault may lie in the forward sensing module (FSM)
Was Sie tun können
- 1Read the code with a diagnostic tool and see whether it is active or only stored
- 2Start with the codes in the central electronic module (CEM), since several communication faults there point to a common fault in the network
- 3Use a multimeter to check that the CAN wires have no break, no short to each other and no contact with ground or voltage
- 4Check the connectors at the engine control module for contact resistance, oxidation and looseness
- 5Tell the workshop if the engine control module has recently been replaced, since a module not intended for the car can cause this code
Symptome, die Sie bemerken können1
- Cruise control does not engage
Was der Fehler beeinflussen kann2
- The cruise control function is switched off
- Cruise control cannot be activated
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.